Decorative Sculptural Coating Stucco Dry Plaster Mortar Mix Production Line
Technical Parameters of Dry Mortar Production Line:
| Name | Specification | Power(KW) |
| Biaxial Agvaric Mixer | Capacity: 2m3 | 18.5+4 |
| Steel material: Q235 |
| Tank thickness: 6mm |
| Mixing time:3-5minutes |
| Premix Bin | Capacity: 1.5m3 | / |
| Thickness: 3mm |
| Steel material: Q235 |
| Finished product and mix bin | Capacity: 2.5m3 | 7.5 |
| Thickness: 3mm |
| Automatic accurate weighing system | Capacity: 1.5m3 | 4 |
| Steel material: Q235 |
| Screw conveyor | Diameter: 219mm | 7.5 |
| Automatic weighing and packing machine | Bage weight: 5kg-50kg | 3 |
| Bucket elevator | TDG3623 | 5.5 |
| Steel material: Q235 |
| Belt width:300mm |
| Impulse Dust Collector | 4bag, 18bag | 2.2 |
| Electric control system | PLC | / |
| Air compressor | 0.9m3/min | 4 |
| Work platform | Two floor | / |
Descriptions of Dry Mix Mortar Plant:
Stepped horizontal installation of the equipment (suitable for lower workshops, no foundation, simple installation), excellent performance, simple operation, small floor space, less work per unit (2-3 people), high material mixing uniformity, production High efficiency, it is a dry powder mortar production equipment with moderate price, reasonable configuration, high cost performance and low maintenance cost.
Main configuration: large angle screw feeder (division type and underground type, please specify when ordering), platform bracket, double shaft high efficiency mixer, unloader, finished screw hoist, storage bin, fully automatic packaging, dust collector (Optional), electrical control cabinet and other components.
Dry mortar production line can produce following dry mortar:
The first type is bonded mortar, which mainly includes tile adhesive, caulking agent, special bonding mortar for thermal insulation composite system, etc.;
The second type is plastering mortar: such as interior and exterior wall plastering, putty, colored decorative mortar, thermal insulation mortar, etc.;
The third type is masonry mortar: including ordinary masonry mortar, special thin bed mortar for concrete blocks, and thermal insulation masonry mortar;
The fourth type is floor mortar: for example, ordinary floor mortar, self-leveling mortar, etc.;
The fifth type is special mortar: including repair mortar, waterproof mortar, hardened powder, etc.
Advantages:
The tower-type production line has few raw material circulation links, and the logistics are distributed in the sealed passage. Therefore, the energy consumption is low, the production efficiency is high, the raw material waste is small, there is no dust pollution, and the failure rate is low. And because of the structure placed on the raw material tank, the production line covers an area of 1/3 of the flat production line.
Product Tags:
|
|
Sculptural Coating Stucco Plaster 20t/H Dry Mortar Production Line Images
|
